Paint calculator
Measure your rooms and find out exactly how much paint to buy, including the best mix of tin sizes, so you’re not left short or with half a tin spare.
How to work out how much paint you need
- Choose metric or imperial, then measure each room: length, width and wall height in metres or feet. Add more rooms if you’re painting several.
- Count the doors and windows so their area is taken off, and pick the wall surface: smooth, textured, or rough and porous like brick or concrete. Tick “Paint the ceiling too” if you need it.
- Check the coverage on your tin, choose the number of coats, and see how much paint and which tins to buy.
How the paint calculator works
Wall area is the room’s perimeter times its height, minus doors (about 1.7 m² each) and windows (about 1.5 m² each, but measure yours for accuracy). That area is multiplied by the number of coats plus a 10% allowance for touch-ups and spills, then divided by the paint’s coverage.
For rough or textured walls, the coverage is reduced to allow for the extra paint they soak up. We then suggest the mix of tin sizes that leaves the least paint over, using common Aussie sizes of 15, 10, 4 and 1 litres, or US gallons and quarts in imperial mode.
Painting brick, concrete and render
Brick, besser block, bagged walls, render and concrete use a lot more paint than a smooth interior wall. There are two reasons:
- They soak it up. Porous masonry absorbs the first coat, especially if it’s never been painted.
- They have more surface. Every bump, groove and mortar joint adds area that a flat measurement doesn’t count.
As a rough guide, allow about 50% more paint for rough or porous surfaces, and about 15–20% more for light textures. Choose the surface in the calculator and it adjusts the amount for you.
A masonry sealer or primer on bare brick or concrete stops the topcoat soaking in, so it goes further and looks more even. Use a thick-nap roller (20–25 mm) to get into the texture, and always check the coverage figure for the actual exterior paint you’re buying, because it’s usually lower than for interior paint.
Metric or imperial?
Australian paint is sold in litres, and coverage is shown in square metres per litre. US paint cans use gallons, quarts and square feet per gallon. Switch to imperial if you measured in feet or you’re using an overseas guide, and the calculator converts what you’ve already entered.
Coverage claims vary a lot between brands and countries, so go by the figure on the paint you’re actually using.
Painting tips
- Two coats is standard for an even finish, even with “one coat” paints.
- Use undercoat or primer on new plaster, bare timber, patched areas, bare masonry, or when going from dark to light.
- Buy all your paint at once so it’s from the same batch, and box it (mix the tins together) for an even colour.
- Ceilings usually use a flat ceiling paint, so they’re worked out separately.
Frequently asked questions
How much does a litre of paint cover?
Most interior wall paints cover about 12 to 16 square metres per litre per coat on a smooth wall. Rough, porous or textured surfaces like brick and concrete can cover only 6 to 10. Check the label on your tin.
How much paint do I need for a brick wall?
Measure the wall, then choose “Rough or porous” as the surface. Expect to use about 50% more than you would on a smooth wall, plus a sealer if the brick has never been painted.
How much paint do I need for a bedroom?
A typical 3 × 3.6 m bedroom with 2.4 m walls has about 28 m² of wall after the door and window. Two coats need roughly 4 litres.
How many square feet does a gallon of paint cover?
US paint cans usually say 250 to 400 square feet per gallon per coat on a smooth surface, and less on rough or porous surfaces. Switch the calculator to imperial to work in feet and gallons.
Why add an extra allowance?
Rollers, trays and touch-ups use more than the theoretical amount. The 10% allowance helps you avoid a second trip to the shop.
Add this Calculator to your website
Add this calculator to your website
Free for painters, paint and hardware stores, builders, renovation and home bloggers. Copy the code below and paste it into your page (in WordPress, use a Custom HTML block). It resizes itself and works on mobile.